Code Definition

B1635 — Mirror Driver Right Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Generic

About B1635

B1635 is a manufacturer-specific body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1635 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1635 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) or door control module monitors the output driver circuit that controls the right side outside mirror motor. DTC B1635 is set when the module detects an electrical fault in the driver output, such as an open circuit, short to power, short to ground, or excessive current draw when the mirror is commanded to move. The mirror motor uses bidirectional voltage applied through paired output drivers within the module to position the mirror glass for vertical and horizontal adjustment, and on some vehicles to operate the fold or memory function. When this code is set, the...

Join TaT to view the complete code information and diagnostic details.

Quick Facts