Code Definition

B1753 — Hazard Flash Output Circuit Failure

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1753

B1753 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1753 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1753 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) drives the hazard flasher output, which energises the front and rear turn lamps simultaneously when the hazard switch is activated. DTC B1753 is set when the BCM detects a general electrical fault on the hazard flash output drive, such as a current draw outside specification, an unexpected feedback voltage, or an output that does not respond correctly to the commanded state. The BCM typically uses a smart driver with current sensing, so a bulb out condition, an excess load from added accessories, or wiring damage can all latch this code. When this code is active, ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts