Code Definition

B1756 — Hazard Flash Output Circuit Short To Ground

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1756

B1756 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1756 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1756 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) drives the hazard flasher output, which energises the front and rear turn lamps simultaneously when the hazard switch is pressed. DTC B1756 is set when the BCM detects an unintended path to ground on the hazard output drive line, meaning the smart driver is being pulled to ground when it commands the output high. The module sees this as excessive current draw or as a stuck low signal and stores the code to protect itself. When this code is active, hazard lamps may not illuminate, may glow dimly, or the BCM may shut the output down completely. A hard short to groun...

Join TaT to view the complete code information and diagnostic details.

Quick Facts