Code Definition

B1754 — Hazard Flash Output Circuit Open

System: Body  |  Type: Manufacturer-Specific  |  Make: Ford

About B1754

B1754 is a manufacturer-specific body diagnostic trouble code recorded for Ford vehicles. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B1754 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

B1754 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Body Control Module (BCM) drives the hazard flasher output circuit, which energises the front and rear turn lamps simultaneously when the hazard switch is pressed. DTC B1754 is set when the BCM detects an open circuit on the hazard output drive, meaning no load is present on the output line and the module sees no current draw when it commands the lamps to flash. The BCM uses a smart driver with current sensing to confirm bulbs are connected and drawing within specification, so an unplugged lamp connector, broken harness, or all bulbs failed at once will register as an open circuit. When th...

Join TaT to view the complete code information and diagnostic details.

Quick Facts