Code Definition

P1335 — Engien torque control limit reached

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Audi

About P1335

P1335 is a manufacturer-specific powertrain diagnostic trouble code recorded for Audi vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1335 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

Modern Audi and Volkswagen engine management is built around a torque based structure. The Engine Control Module converts accelerator pedal position and every other torque request into a demanded torque figure, then calculates the torque the engine is actually producing from airflow, injection quantity, ignition timing, engine speed and efficiency corrections. A monitoring level continuously compares the two. DTC P1335 is stored when the module finds that delivered torque falls short of the demanded value by more than the permitted tolerance for longer than the allowed period, meaning the engi...

Join TaT to view the complete code information and diagnostic details.

Quick Facts