Code Definition

P3007 — Camshaft position sensor no signal

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Audi

About P3007

P3007 is a manufacturer-specific powertrain diagnostic trouble code recorded for Audi vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P3007 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P3007 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The engine control module (ECM) sets this code when it fails to detect a signal from the camshaft position sensor. This sensor provides critical data for synchronizing fuel injection and ignition timing. A missing signal can cause hard starting, misfires, poor engine performance, or the engine failing to start altogether.

Quick Facts