Code Definition

P3008 — Camshaft position sensor signal limit exceeded

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Volkswagen

About P3008

P3008 is a manufacturer-specific powertrain diagnostic trouble code recorded for Volkswagen vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P3008 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P3008 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The engine control module (ECM) sets this code when the signal from the camshaft position sensor exceeds the expected range or deviates from normal operating parameters. This sensor monitors camshaft position to synchronize fuel injection and ignition timing. A faulty signal can lead to poor engine performance, misfires, or difficulty starting.

Quick Facts