Code Definition

P0060 — HO2S Heater Resistance (Bank 2 Sensor 2)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0060

P0060 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0060 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0060 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0060 code indicates a problem with the heater element's resistance in the oxygen sensor known as Bank 2 Sensor 2. This sensor is a downstream sensor, located after the catalytic converter. The Engine Control Module (ECM) sets this code when the resistance of the heater element within the oxygen sensor deviates from the manufacturer's specified range. The heater element is vital for the oxygen sensor to reach its operational temperature rapidly, which is necessary for accurately measuring the exhaust gas composition.

Quick Facts