Code Definition

P0063 — HO2S Heater Control Circuit Low (Bank 2 Sensor 3)

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P0063

P0063 is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0063 is stored, the module has detected a signal or supply voltage lower than the expected operating range; a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0063 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The P0063 code indicates a low voltage condition in the heater control circuit of the oxygen sensor identified as Bank 2 Sensor 3. This sensor is usually the third sensor in the exhaust system on Bank 2, found in vehicles with more complex exhaust configurations. The heater element in the oxygen sensor is essential for rapidly bringing the sensor to its operating temperature following engine start-up. The Engine Control Module (ECM) sets this code when it detects a voltage in the heater circuit that is lower than expected, potentially impairing the sensor's ability to accurately assess the exh...

Join TaT to view the complete code information and diagnostic details.

Quick Facts