Code Definition

P062A — Fuel pump power (monitoring) circuit out of range - Circuit A

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P062A

P062A is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P062A is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P062A is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P062A is set when the Engine Control Module (ECM) detects that the power circuit for the fuel pump, specifically Circuit A, is operating outside of its expected range. This diagnostic trouble code suggests that the voltage or current in the fuel pump's power circuit is not aligning with the ECM's predefined specifications, indicating a potential electrical issue. This could be due to a variety of reasons, including wiring problems, a malfunctioning fuel pump, or issues within the ECM itself.

Quick Facts