Code Definition

P062D — PCM Fuel Injector Driver Performance Error - Bank 1

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P062D

P062D is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P062D is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P062D is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P062D is set when the Powertrain Control Module (PCM) detects a performance issue with the fuel injector driver in Bank 1 of the engine. This diagnostic trouble code specifically points to a problem in the circuit or system that controls the operation of the fuel injectors on one side (Bank 1) of the engine. The issue could be related to the PCM's ability to effectively control the fuel injectors, or it might be due to electrical problems within the injector circuitry itself.

Quick Facts