Code Definition

P062E — ECM fuel injector driver performance error - Bank 2

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P062E

P062E is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P062E is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P062E is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The fault code P062E is set when the Engine Control Module (ECM) detects a performance issue with the fuel injector driver in Bank 2 of the engine. This diagnostic trouble code suggests a malfunction or inefficiency in the control or operation of the fuel injectors on the second bank (Bank 2) of the engine. The problem could stem from the ECM's circuitry or control algorithms for operating the fuel injectors, or it might be due to electrical issues within the injector circuitry on Bank 2.

Quick Facts