Code Definition

P1828 — Transmission Transfer Case Counter Clockwise Shift Relay Coil Circuit Failure

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1828

P1828 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1828 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1828 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This DTC is set when the transfer case control module detects a malfunction in the relay coil circuit responsible for commanding a counter-clockwise shift of the transfer case motor. The module continuously monitors voltage and current feedback from the relay coil circuit. If the measured values deviate from expected norms, such as an open, short to ground, or short to voltage, the fault code is triggered. This code typically applies to electronically controlled transfer cases with shift motor relays integrated into the system.

Quick Facts