Code Definition

P1862 — Transmission Transfer Case Contact Plate Power Circuit Failure

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1862

P1862 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1862 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1862 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This DTC relates to the power supply circuit for the transfer case contact plate assembly. The contact plate, usually built into the shift motor assembly, provides position feedback that tells the control module which mode the transfer case is in. The module supplies a regulated voltage to the contact plate and expects consistent current draw and signal behaviour. DTC P1862 sets when it detects an open, a short to ground, or a short to voltage in this power feed circuit. With the power circuit faulty the module loses reliable position feedback, so the transfer case may fail to shift, report th...

Join TaT to view the complete code information and diagnostic details.

Quick Facts