Code Definition

P1867 — Transmission Transfer Case Contact Plate General Circuit Failure

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1867

P1867 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1867 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1867 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This DTC is set when the transfer case control module detects a general electrical malfunction in the contact plate signal circuit. The contact plate, located within the shift motor assembly, reports the current transfer case position by varying resistance across a set of contacts as the mechanism moves. The module reads these signals to validate which range or mode is selected. DTC P1867 sets when that feedback is missing, inconsistent, or outside the expected range from signal dropout, voltage fluctuation, or invalid resistance values. As a result the transfer case may fail to shift, report ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts