Code Definition

C1095 — ABS Hydraulic Pump Motor Circuit Failure

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1095

C1095 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1095 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1095 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

DTC C1095 is a chassis code set by the ABS or stability control module when it detects a fault in the hydraulic pump motor circuit. The module drives an electric pump motor to build the hydraulic pressure needed for anti lock braking, traction control, and stability control events. C1095 sets when the module commands the pump motor and the monitored feedback, such as motor current, run time, or pressure response, falls outside expected limits, indicating the motor is not running correctly or the circuit is open, shorted, or drawing abnormal current. When this code is set the ABS, traction cont...

Join TaT to view the complete code information and diagnostic details.

Quick Facts