Code Definition

C1430 — Damper LR Circuit Open

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1430

C1430 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1430 is stored, the module has detected an open (broken or disconnected) electrical path in the monitored circuit.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1430 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The C1430 fault code indicates the suspension control module has detected an open circuit on the left rear (LR) electronic damper control circuit. Electronically controlled dampers use solenoid valves to vary internal fluid restriction in real time. The module energises the damper coil to command the damping characteristic, then monitors current flow as feedback. This code is specifically set when the damper coil fails to conduct current when commanded, indicating either an open winding inside the damper solenoid or an open in the wiring between the module and the damper. When this code is act...

Join TaT to view the complete code information and diagnostic details.

Quick Facts