Code Definition

C1437 — Accelerometer Rear Circuit Short To Ground

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1437

C1437 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1437 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1437 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The C1437 fault code indicates the suspension control module has detected a short to ground on the rear accelerometer signal circuit. The rear accelerometer reports vertical body acceleration at the rear of the vehicle, providing the module with motion data used to calculate adaptive damping. The sensor outputs a 0V to 5V analog signal centred on approximately 2.5V (zero G). This code is specifically set when the module detects the signal pinned at or near zero volts, indicating the signal wire is shorted directly to chassis ground. When this code is active, the module has no usable rear accel...

Join TaT to view the complete code information and diagnostic details.

Quick Facts