Code Definition

C1960 — Driver Brake Apply Circuit Fault

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1960

C1960 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

When C1960 is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1960 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The driver brake apply circuit provides the ABS or stability control module with a signal indicating that the driver is pressing the brake pedal, usually from the brake light switch or a brake pedal input. The module uses this to coordinate ABS, traction, stability, and brake assist functions and to distinguish driver braking from automatic system braking. DTC C1960 sets when the module detects a fault in the driver brake apply circuit, such as an open, a short to ground or to voltage, or a signal that does not agree with other brake inputs such as the master cylinder pressure sensor. When thi...

Join TaT to view the complete code information and diagnostic details.

Quick Facts