Code Definition

C1963 — Stability Control Inhibit Warning

System: Chassis  |  Type: Manufacturer-Specific  |  Make: Generic

About C1963

C1963 is a manufacturer-specific chassis diagnostic trouble code. It belongs to the C-prefix family of codes, which covers chassis, braking, steering, suspension, or stability-control faults.

Scanning & clearing: Chassis (C) codes are stored in the ABS, traction control, or stability-control modules. An enhanced or OEM-level scan tool is usually required to read and clear them.

C1963 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The stability control system can be inhibited, or temporarily disabled, when the control module or another system detects a condition that makes safe operation impossible, such as a related sensor fault, a network communication loss, low or high system voltage, or an inhibit request from another module. DTC C1963 is a stability control inhibit warning, set when the system has been prevented from operating. It is usually a symptom of an underlying fault rather than a fault in its own right. When this code is set the stability and traction control warning lamps illuminate and those functions are...

Join TaT to view the complete code information and diagnostic details.

Quick Facts