Code Definition

P1176 — Rear O2S Correction

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Audi

About P1176

P1176 is a manufacturer-specific powertrain diagnostic trouble code recorded for Audi vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1176 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The oxygen sensor fitted behind the catalytic converter has two jobs. It monitors catalyst efficiency, and it also provides a slow trim correction that fine tunes the control loop being run by the upstream sensor, compensating for the gradual drift and ageing of that front sensor. DTC P1176 is stored when this rear oxygen sensor correction for bank 1 reaches the limit of its authority, meaning the ECM has applied as much offset as it is permitted to and the rear sensor is still reporting a mixture that does not match the target. The code therefore does not accuse any one component directly, it...

Join TaT to view the complete code information and diagnostic details.

Quick Facts