Code Definition

P1130 — Long Term Fuel Trim B2 System Too Lean

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Audi

About P1130

P1130 is a manufacturer-specific powertrain diagnostic trouble code recorded for Audi vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1130 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Engine Control Module (ECM) trims fuel delivery to hold the air to fuel ratio at the correct value, and long term fuel trim is the learned correction stored over time for each cylinder bank. DTC P1130 is set when the long term fuel trim for Bank 2 reaches a positive correction limit because the ECM is continually adding fuel to compensate for a lean running condition across the entire speed and load range. Bank 2 is the side of the engine that does not contain cylinder number one, and a lean mixture there means that bank is drawing in more air than is metered or is not receiving enough fue...

Join TaT to view the complete code information and diagnostic details.

Quick Facts