Code Definition

P1131 — Lack Of HO2S Switch - Sensor Indicates Lean

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Generic

About P1131

P1131 is a manufacturer-specific powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1131 is stored, the module has detected a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1131 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

This code is set when the powertrain control module (PCM) detects that the upstream heated oxygen sensor (HO2S) is not switching between rich and lean conditions as expected and is stuck indicating a lean condition. This suggests a potential issue with the sensor, fuel system, or air intake that is causing the engine to run too lean.

Quick Facts