Code Definition

P0A90 (602) — Drive motor A performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A90

P0A90 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A90 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A90 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On Toyota and Lexus hybrids the inverter assembly drives Motor Generator 2 (MG2), the traction motor known as Drive Motor A, under command from the hybrid vehicle control ECU. This manufacturer subcode of P0A90 sets when the ECU detects the inverter is not controlling MG2 correctly, with voltage or current in the motor drive circuit deviating outside the calibrated operating range. In practice the control signals sent toward MG2 do not produce the expected electrical response, which points to a fault in the inverter power electronics rather than the motor itself. Symptoms may include reduced o...

Join TaT to view the complete code information and diagnostic details.

Quick Facts