Code Definition

P0A92 (607) — Hybrid generator performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A92

P0A92 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A92 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A92 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On Toyota and Lexus hybrids the inverter regulates the phase voltage applied to Motor Generator 1 (MG1), the hybrid generator, and the hybrid vehicle control ECU monitors that voltage against what the commanded torque and speed require. This manufacturer subcode of P0A92 sets when the inverter output voltage for MG1 does not match the expected values, particularly under load or regenerative conditions, indicating a fault in the inverter voltage control or monitoring circuit. The ECU watches MG1 phase voltage and overall DC bus behaviour and flags abnormalities in MG1 phase voltage. Likely sour...

Join TaT to view the complete code information and diagnostic details.

Quick Facts