Code Definition

P0A92 (606) — Hybrid generator performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A92

P0A92 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A92 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A92 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On Toyota and Lexus hybrids the inverter precisely regulates the phase current to Motor Generator 1 (MG1), the hybrid generator, to control torque during engine cranking and HV battery charging. This manufacturer subcode of P0A92 sets when the hybrid vehicle control ECU finds a discrepancy between the commanded and the actual MG1 phase current, a loss of current control accuracy that shows up under generator load. The usual roots are an MG1 phase current sensor that has drifted or failed and a fault in the inverter current control circuitry, though an unstable high voltage bus can also disturb...

Join TaT to view the complete code information and diagnostic details.

Quick Facts