Code Definition

P0A92 (261) — Hybrid generator performance

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A92

P0A92 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A92 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A92 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

On Toyota and Lexus hybrids Motor Generator 1 (MG1) is the hybrid generator that starts the engine, generates electricity, and controls engine speed through the power split planetary gearset. This manufacturer subcode of P0A92 sets when the hybrid vehicle control ECU sees a mismatch between expected and actual MG1 torque or rotational speed during engine starting, charging, or power split operation. It commonly points to MG1 performance degradation such as insufficient torque or irregular speed control, often caught during transitions between engine off and engine on states. The cause may be t...

Join TaT to view the complete code information and diagnostic details.

Quick Facts