Code Definition

P000B — Exhaust Camshaft Position Change Slow to Respond - Bank 1

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About P000B

P000B is a generic (obd-ii standard) powertrain diagnostic trouble code. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P000B is stored, the module has detected a signal or supply voltage lower than the expected operating range; and a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P000B is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This code is set when the Engine Control Module (ECM) detects that the exhaust camshaft in Bank 1 is not adjusting its position as quickly as expected in response to operational demands. This assessment is based on the discrepancy between the desired camshaft position, as instructed by the ECM, and the actual position reported by the exhaust camshaft position sensor. If the time taken for the camshaft to reach the desired position exceeds a predefined threshold, the ECM records the P000B code. This slow response could indicate issues in the mechanical operation of the camshaft or delays in the...

Join TaT to view the complete code information and diagnostic details.

Quick Facts