Code Definition

B0070 (12) — RHF seat belt pretensioner squib Circuit shorted to power

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B0070

B0070 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B0070 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B0070 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

In this application DTC B0070 sets when the Airbag Control Module (ACM) detects a short to voltage in the Right Hand Front (RHF) seat belt pretensioner squib circuit. The squib is the electrical igniter that fires the pretensioner charge, and the ACM monitors its circuit resistance and reference level continuously, storing this fault when the loop is unintentionally receiving power from another circuit and the measured level rises outside the allowed band. Because a squib circuit shorted to power can interfere with controlled firing and in a fault condition even risk unintended deployment, the...

Join TaT to view the complete code information and diagnostic details.

Quick Facts