Code Definition

B0072 (19) — LHF seat belt pretensioner squib Circuit shorted to other airbag squib circuits

System: Body  |  Type: Generic (OBD-II Standard)  |  Make: Generic

About B0072

B0072 is a generic (obd-ii standard) body diagnostic trouble code. It belongs to the B-prefix family of codes, which covers body, interior, airbag, or comfort-electronics faults.

When B0072 is stored, the module has detected a short-circuit (voltage pulled to ground or to supply) in the monitored circuit.

Scanning & clearing: Body (B) codes are often stored in the body control module, airbag module, or climate module. A basic OBD-II tool usually will not read body codes — an enhanced or OEM-level scan tool is typically required.

Because B0072 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

The airbag control module (ACM) monitors each squib circuit for correct resistance and isolation from every other squib circuit in the SRS harness. DTC B0072:19 sets when the ACM detects that the Left Hand Front (LHF) seat belt pretensioner squib circuit is unintentionally connected to another airbag or pretensioner squib circuit, most commonly at the seat harness, the ACM connector, or a shared multi pin junction. Because each squib is a low resistance pyrotechnic igniter (typically around 2 ohms) fired by a controlled current pulse, a cross short between squib lines can cause the wrong devic...

Join TaT to view the complete code information and diagnostic details.

Quick Facts