Code Definition

P0A95 — High voltage fuse blown

System: Powertrain  |  Type: Generic (OBD-II Standard)  |  Make: Toyota

About P0A95

P0A95 is a generic (obd-ii standard) powertrain diagnostic trouble code recorded for Toyota vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P0A95 is stored, the module has detected a signal or supply voltage lower than the expected operating range; and a signal or supply voltage higher than the expected operating range.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

Because P0A95 is a generic OBD-II code, its base definition is shared across manufacturers. The specific diagnostic steps, reference values, and repair procedures can vary by vehicle, and the TaT Diagnostic Assistant includes verified procedures submitted by working technicians.

Code Information

This DTC sets when the hybrid vehicle control ECU detects an open circuit or blown condition in the high-voltage fuse located within the HV battery junction block assembly. The ECU monitors voltage and current across the high-voltage system and compares it to expected values. If a significant discrepancy indicating a lack of current flow while high-voltage contactors are engaged is detected, the ECU determines that the high-voltage fuse is open and sets this fault.

Quick Facts