Code Definition

P181F (00-2E) — Electric Transmission Fluid Pump Control Module Command Signal Circuit

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Mazda

About P181F

P181F is a manufacturer-specific powertrain diagnostic trouble code recorded for Mazda vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P181F is stored, the module has detected an electrical-circuit fault in the wiring, connector, or driver associated with the named component.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P181F is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Transmission Control Module (TCM) communicates with the Electric Transmission Fluid Pump Control Module over a dedicated command signal circuit to request auxiliary pump operation whenever transmission fluid flow is needed with the engine off. DTC P181F is set when the TCM detects an electrical fault on this command signal circuit, such as an open, a short to ground, a short to battery, or an implausible voltage level that prevents the pump control module from receiving a valid command. The electric transmission fluid pump is used on Mazda vehicles equipped with idle stop to maintain trans...

Join TaT to view the complete code information and diagnostic details.

Quick Facts