Code Definition

P1184 — Engine Oil Temperature Sensor out of self-test range

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Ford

About P1184

P1184 is a manufacturer-specific powertrain diagnostic trouble code recorded for Ford vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1184 is stored, the module has detected a plausibility fault — the measured value is in the electrical range but is not consistent with expected operating behaviour; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1184 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The Engine Oil Temperature (EOT) sensor is a thermistor that reports oil temperature to the Powertrain Control Module (PCM). DTC P1184 is a self test range fault, set when the oil temperature signal falls outside the window the PCM expects during its key on or running self test, even though the circuit may not be fully open or shorted. This is a rationality check rather than a hard circuit fault, so it commonly indicates a sensor that is drifting, biased, or reading a temperature that does not agree with the engine state, or a high resistance connection that shifts the value. The reading may b...

Join TaT to view the complete code information and diagnostic details.

Quick Facts