Code Definition

P1169 — Heated Oxygen Sensor 2, bank 2 circuit fault

System: Powertrain  |  Type: Manufacturer-Specific  |  Make: Hyundai

About P1169

P1169 is a manufacturer-specific powertrain diagnostic trouble code recorded for Hyundai vehicles. It belongs to the P-prefix family of codes, which covers engine, transmission, emissions, or fuel-system faults.

When P1169 is stored, the module has detected a bank-specific fault, meaning it applies only to one cylinder bank of a multi-bank engine; and a sensor-related fault — the reported value from the named sensor is out of spec.

Scanning & clearing: A generic OBD-II scan tool will usually read and clear powertrain (P) codes. For live data, freeze-frame capture, and bi-directional tests you may need a more capable scan tool that supports the vehicle's ECM protocol.

P1169 is a manufacturer-specific code. The same code string on a different make may have a different meaning. Always confirm the code's definition against the vehicle's service information for the specific make and model under test.

Code Information

The downstream heated oxygen sensor on Bank 2 Sensor 2 is fitted after the catalytic converter on the second cylinder bank and is used by the Engine Control Module chiefly to monitor catalyst efficiency rather than to control fuel. DTC P1169 is set on Hyundai and Kia vehicles when the ECM detects an electrical fault in this Bank 2 Sensor 2 circuit, such as an open, a short, or a signal held outside the expected voltage range. A healthy downstream sensor normally rests at a fairly steady mid range voltage when warm, so a circuit fault appears as a flat trace stuck high, stuck low, or pinned at ...

Join TaT to view the complete code information and diagnostic details.

Quick Facts